1. Philippines
  2. Command™
  3. Contact Us
  4. Frequently Asked Questions About Command™ Products

Frequently Asked Questions About Command™ Products

Can you use Command™ Strips on glass? Are there adhesive hooks for rough surfaces? How long do Command™ Hooks last? Read the most frequently asked questions (and the answers!) to learn more about using Command™ Products.


FAQ Icon

To what surfaces will Command™ Products stick?

Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard.

Climate and Temperature

FAQ Icon

What can happen to Command™ Products in Extreme Heat or highly humid climates?

The adhesives on Command products may soften at temperatures above 40°C. If you are expecting a heatwave, it is recommended you remove any picture frames and then re-mount when weather conditions return to normal. In highly humid locations within the home such as in the bathroom or in parts of the country that experiences regular high humidity, try our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.

Product Information and Use

FAQ Icon

Can I use more than one hook if I want to hang an item that's heavier than the weight listed on the package?

No. We don't recommend it. Weight may not be distributed equally and can result in failure.


  • Ensure that you have left at least one hour before you hang your picture frame. Once you have positioned the frame in initial application, we always recommend that you remove the frame from the wall (grab frame at the bottom and peel off surface).​​

    Once the frame is taken down, then make sure you press firmly on all the strips again for 30 seconds to ensure they are firmly in place (i.e. press on strips on the wall and on the back of the frame). Wait one hour before rehanging picture (to allow the adhesive to bond), and when doing so, listen for the 'click' to ensure the strips are 'locked' in place.

  • Ensure strips have been separated along perforations before pairing together.​

    Ensure you have pushed each set of strips firmly through the frame for 30 seconds when first applied.​